Free shipping all orders over $39

How to Clean a Bathtub the Right Way

How to Clean a Bathtub the Right Way

Learning how to clean your bathtub is a simple but essential task. Not only is a dirty bathtub unsightly, but it can also harbor bacteria and mold. Regular cleaning can help to prevent these issues and keep your tub looking and smelling fresh.
There are a few different types of bathtubs that you may have in your home, including acrylic, fiberglass, and porcelain. Each type requires a slightly different approach to cleaning, but the general steps are similar.

Steps to Clean a Bathtub

  1. Remove any clutter or items from the tub.
  2. Run hot water in the tub for a few minutes to help soften any soap scum or grime.
  3. Grab your bottle of Therapy Clean Tub & Tile Cleaner. This is a natural citric-acid based product formulated to remove soap scum and water marks. It has a low pH which eats away at any mineral deposits or gunk on the surface.
  4. Spray the entire surface of the tub with the cleaning solution, including the walls, floor, and any hard-to-reach corners.
  5. Let the solution sit for about 10-15 minutes.
  6. Use a sponge or a nonabrasive cleaning pad to scrub the tub, paying extra attention to any stains or areas that are particularly filthy.
  7. Rinse the tub thoroughly with warm water.
  8. If you have a particularly stubborn stain or hard water deposits, you may need to use a stronger cleaner. A paste made of baking soda and water can be effective for removing these types of stains. Simply apply the paste to the affected area, let it sit for a few minutes, and then scrub it away with a sponge.
  9. Once the tub is clean, rinse it one final time with hot water to remove any remaining dirt or cleaning residue.

Tips for Regular Cleaning of Your Bathtub

  1. Wipe down the tub after every use with a clean cloth, sponge, or squeegee.
  2. Use a dedicated bathroom cleaner such as Therapy Clean Tub & Tile Cleaner.
  3. Regularly clean the bathtub drain to help prevent clogs. Use either a coat-hanger or a specialty tool which can reach into the drain and pull out debris.
  4. If you have a bathtub with grout, be sure to clean it regularly to prevent the build-up of dirt and mildew. You can use a grout cleaner or a mixture of equal parts water and vinegar to clean the grout.

Tips for Cleaning an Acrylic Bathtub

  1. Avoid using harsh chemicals including bleach or ammonia. Stick to mild cleaners such as Therapy Clean Tub & Tile Cleaner.
  2. To deep clean an acrylic tub, you can use a paste made of baking soda and water. Apply the paste to the surface of the tub, let it sit for a few minutes, and then scrub it away with a sponge or nonabrasive pad.
  3. After cleaning, be sure to rinse the tub thoroughly to remove any cleaning residue.

Steps to Clean a Fiberglass Bathtub

  1. Remove all items from the tub.
  2. Next, run hot water in the tub for a few minutes to help soften any soap scum or dirt that may be present.
  3. Mix together a cleaning solution of equal parts water and white vinegar in a spray bottle, or use a Therapy Tub & Tile Cleaner.
  4. Spray the entire surface of the tub with the cleaning solution, including the walls, floor, and any hard-to-reach corners.
  5. Let the solution sit for about 10-15 minutes.
  6. Scrub the tub with a sponge or a nonabrasive cleaning pad, paying close attention to any stains or grimy areas.
  7. Rinse the tub thoroughly with hot water to remove the cleaning solution.
  8. Use a harsher cleanser if the stain or hard water deposits are extremely difficult to remove. For these kinds of stains, a paste made of baking soda and water works well. Apply the paste directly to the troublesome area, let it sit for a short while, and then scrub it away with a sponge.
  9. Once the tub is clean, rinse it one final time with hot water to remove any remaining dirt or cleaning residue.
  10. To help prevent scratches and damage to the surface of your fiberglass tub, be sure to use a nonabrasive cleaner and avoid using harsh or abrasive sponges or pads.
  11. To help keep your fiberglass tub looking its best, you may want to consider applying a sealant to the surface. This can help to protect the tub from stains and scratches and make it easier to keep clean overall.
  12. After cleaning your fiberglass tub, be sure to ventilate the area to help remove any lingering odors from the cleaning products. You can open a window or use a fan to help circulate the air.

Conclusion

In conclusion, bathtub cleaning is essential to keep your home sparkling and healthy. By following simple steps and using the right cleaning products, you can effectively remove dirt, soap scum, and stains from your bathtub. Regular cleaning can help prevent the build-up of dirt and mold and mildew, which can be harmful to your health. Keeping your bathtub clean and well-maintained allows you to enjoy a fresh, inviting space for relaxing and rejuvenating. These cleaning tips can help you find the best way to clean your bathtub and keep it looking its best. Don't let stubborn bathtub stains get you down – with the right approach, you can easily remove them and keep your tub sparkling clean.

Previous post Next post